Back to Blog
Product Reviews 2026-11-15 Fuwa Fuwa Land-Fuwa Fuwa Land 0 views

Cang-Toys Nuwa NVWA Metal Frame Kit: Build and Display Notes

Cang-Toys Nuwa NVWA Metal Frame Kit: Build and Display Notes

Plan your Cang-Toys GMS-005 Nuwa build around its pre-assembled alloy frame, then pose and display the 1/100 kit and Ru She snake without straining joints.

Start with what the box actually gives you

The Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) is a model kit that requires assembly, but it is not a bare-sprue build. The catalog lists a pre-assembled alloy inner frame, so your work is mostly armor layering, accessory setup, decals and posing rather than frame construction. That changes how you should prepare your bench: you are handling a finished metal skeleton, not building one from scratch.

The kit also arrives with a large companion piece. Ru She, the articulated mecha snake, extends to roughly 70 cm (27.5") and can be displayed independently or combined with Nuwa for a full-armor mode. Plan space for that before you start, because the finished display is much wider and taller than the 20 cm (7.87") main figure alone.

Confirmed kit contents and scale

  • Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) Metal Frame Model Kit - B2B: 1/100 scale kit standing approximately 20 cm (7.87") tall once built, with a pre-assembled alloy inner frame. The metal frame is already built, so your assembly time goes into armor, accessories and decals rather than frame construction.
    Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) Metal Frame Model Kit - B2B
    Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) Metal Frame Model Kit - B2B
  • Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) Metal Frame Model Kit - B2B: Includes Nuwa main figure, Creation Yin-Yang Severing scissors, Primordial Spear, Heaven-Mending Bow with supersonic arrows, large articulated wing system, 8 interchangeable hands, display stand, waterslide decals and instruction manual. Knowing the full accessory list lets you set up a parts tray and decide which weapon and hand combination you want before assembly begins.
  • Cang-Toys 1/100 GMS-005 War of the God Nuwa (NVWA) Metal Frame Model Kit - B2B: Ru She articulated mecha snake extends to roughly 70 cm (27.5") and can be displayed independently or combined with Nuwa. The snake is a separate display decision, not just an accessory, so shelf planning should happen before the build is finished.

A practical assembly order for a pre-built metal frame

Because the alloy frame is supplied pre-assembled, treat the early stages as inspection and dry-fitting rather than construction. The catalog does not list a specific step sequence, so follow the included instruction manual for the exact order and use these checkpoints as general handling guidance.

  1. Inspect the frame and joints before adding armor: Check that the pre-assembled alloy frame articulates smoothly and that no joints feel locked or loose before you cover it with layered armor. The catalog describes the frame as providing stability, durability and smooth articulation, but it does not specify maintenance procedures, so avoid forcing any joint that resists movement.
  2. Dry-fit armor layers before committing: The kit is described as having layered armor and crisp color separation that look good straight from the box. Test-fit armor pieces over the frame first so you can identify tight connections without stressing the metal skeleton.
  3. Set up the wing system and weapons on the bench: The large articulated wing system, scissors, spear and bow are all separate pieces. Lay them out and decide your intended pose before attaching them, because swapping heavy accessories on a finished figure means more handling of the metal frame.
  4. Apply waterslide decals after the main assembly is stable: The kit includes waterslide decals, which behave differently from stickers. The supplied information does not include decal-setting instructions, so follow the manual and your usual waterslide routine rather than rushing this step.
  5. Choose hands and weapons last: With 8 interchangeable hands, the final hand choice depends on whether Nuwa is holding the scissors, spear or bow, or posed empty-handed. Fit hands after the arms are fully assembled so you are not repeatedly handling a partially built figure.

Posing advice for the alloy frame and wing system

A metal inner frame gives the kit a different feel from an all-plastic build. The catalog credits the alloy frame with stability and smooth articulation, but it does not publish load limits or recommended pose durations. Use that as a reason to pose deliberately: support the figure at the torso or hips when adjusting limbs, and move one joint at a time rather than pulling a whole limb into position.

The large articulated wing system is the biggest variable in display. Decide whether the wings will be spread for a display-dominating silhouette or folded to save shelf depth, and set that before adding the bow or spear. If you plan to combine Nuwa with Ru She in full-armor mode, build that combined pose on the stand rather than lifting the finished assembly into place.

Display planning around a 70 cm snake

The main figure is roughly 20 cm tall, but the companion snake changes the footprint. These are practical display considerations based on the supplied measurements, not manufacturer placement instructions.

  • Measure shelf width before assembly: Ru She extends to roughly 70 cm (27.5"), so a solo Nuwa shelf may not fit the combined display. Measure the intended surface and decide early whether the snake will coil beside Nuwa or wrap around the full-armor mode.
  • Use the included display stand for the main figure: The kit includes a display stand. The catalog does not specify a weight rating or a required stand configuration for combined mode, so test stability with the stand on a level surface before committing to a final pose.
  • Keep the combined mode away from high-traffic edges: A long articulated snake plus a winged figure creates more overhang than a standard kit. Place the display where the snake's tail and the wing tips are not at risk of being knocked.
  • Plan for dusting access: The catalog does not include a cleaning procedure. A display with some clearance around the figure and snake makes routine dusting easier without handling the metal frame repeatedly.

Ordering and lead-time considerations

The available variant is listed as B2B - 2 MONTHS ETA, so treat the build as a planned project rather than an immediate weekend kit. Use that lead time to clear shelf space, decide on a display stand location and gather your usual tools. The catalog does not list required tools, so rely on the instruction manual for any specific requirements.

The product record also notes that this is a model kit requiring assembly. It is not a pre-built figure, and the supplied information does not confirm painted or finished-sample photography beyond the described color separation. If you are comparing it with the Fuxi release mentioned in the catalog, note that the supplied record does not list Fuxi's specifications, so a direct feature comparison is not supported here.

Related Articles

Customer Service
Home
Products
Cart
Profile