Fixing Loose Joints on Moshow Progenitor Effect Figures

Quick answer

For loose joints on Moshow Progenitor Effect figures, start with a simple friction test to identify the problem area, then apply a thin layer of clear nail polish or joint-tightening fluid to the peg or ball joint. Let it dry fully before reassembling.

Diagnosis and fix steps

• Symptom: The arm or leg flops down under its own weight or moves too freely when you pose it. The joint does not hold position.
• Likely cause: Wear on the plastic joint peg or ball socket. The metal parts are usually fine, but the plastic interface has lost friction.
• Corrective action: Separate the joint. Apply a thin layer of clear nail polish or joint-tightening fluid to the peg or ball. Let it cure for 24 hours. Reassemble and test. Repeat if still loose. Do not use superglue or epoxy — they can fuse the joint permanently.
• Stop point: If the joint is cracked, the peg is broken, or the metal hinge is bent, stop. Do not attempt glue repairs. Contact Fuwa Fuwa Land for replacement options. For the Moshow Progenitor Effect Nobel Class Marquis of Wucheng, expect a 6-8 week lead time on special orders.

Product facts

• Moshow Progenitor Effect Nobel Class Marquis of Wucheng: Moshow Progenitor Effect Nobel Class Marquis of Wucheng is a model kit from the Moshow line, available at Fuwa Fuwa Land. It is a special order item with a 6-8 week lead time. If a joint is damaged beyond repair, ordering a replacement takes 6-8 weeks, so try the fix first before committing to a new purchase.