HG GN Arms Type E Real Type Colors: Step-by-Step Build Guide

Quick answer

Build the HG GN Arms Type E Real Type Colors in stages: prep and inventory first, then assemble the main body, arms, and weapon units, and finish with color care and display. Work slowly and dry-fit each joint before committing, because this is a Premium Bandai kit with a special color scheme and a 6–8 week lead time.

Step-by-step build sequence

1. Inventory and wash the runners: Open the box, check each runner against the manual, and gently wash the runners in lukewarm water with a drop of mild dish soap, then let them dry completely. Common mistake: skipping the wash leaves mold-release residue that can affect paint and decals later. Photograph the runner layout before washing so you can quickly identify parts later.
2. Prep and trim parts: Use sharp nippers to cut parts from the runner, leaving a small nub, then trim the nub with a hobby knife and sand flush. Checkpoint: test-fit each part before sanding to avoid removing too much material. Work in a well-lit area and keep the Real Type Colors parts away from direct heat.
3. Assemble the main body and joints: Follow the manual order for the torso and internal frame, dry-fitting each joint before snapping it together. Common mistake: forcing a joint that feels tight can crack the plastic; if it resists, check for a misaligned peg. Move each joint through its full range immediately after assembly to confirm it is seated.
4. Build the arms and weapon units: Assemble the arm and weapon sub-assemblies separately, then attach them to the main body. Checkpoint: keep left and right parts separated to avoid mixing mirrored pieces. Label small sub-assemblies with tape if you need to pause the build.
5. Apply decals and panel lines: Apply decals and panel lines only after the kit is fully assembled and you are satisfied with the joints. Common mistake: applying decals before final assembly can cause them to rub off during handling. Use a soft cloth to press decals flat and avoid trapping air bubbles.
6. Final color care and display: Wipe the kit with a dry microfiber cloth, avoid harsh solvents on the Real Type Colors plastic, and pose it on a stable stand. Checkpoint: if you plan to topcoat, test on a spare runner first to confirm compatibility. Store unused parts and the manual together in case you need to disassemble later.

Product facts

• Premium Bandai HG GN Arms Type E Real Type Colors: Premium Bandai HG GN Arms Type E model kit in Real Type Colors; HG Exia is not included. You will need to supply your own Exia if you want the combined display, and you should budget for that before starting.