MG Advanced GN-X: Build and Customization Tips

Quick answer

Build your Premium Bandai MG 1/100 Advanced GN-X by following the manual's sequence, using careful nub removal, and adding panel lining and decals for a clean finish.

Build and customization steps

1. Step 1: Prepare and organize parts: Cut each runner part with a side cutter, leaving a small nub. Use a hobby knife to trim flush, then sand with 600–1000 grit for a smooth surface. Organize parts by runner letter to avoid confusion. Skip sanding and you may see visible nub marks on dark-colored armor.
2. Step 2: Assemble the inner frame: Follow the manual for the polycap joints and frame sections. Dry-fit before applying any glue. Pay attention to the knee and shoulder joints—they have tight tolerances that can crack if forced. If a joint feels too tight, lightly sand the peg instead of forcing it.
3. Step 3: Attach armor panels and check alignment: Snap on the outer armor pieces in the order shown. Check that panel lines match up and that the GN-X’s signature shoulder binders sit evenly. Use a small amount of plastic cement only on parts that will not move. Rushing this step can cause misaligned seams that are hard to fix later.
4. Step 4: Panel line and apply decals: Use a fine-tipped panel liner or wash to darken recessed lines. Let it dry for 10 minutes, then wipe excess with a cotton swab lightly dampened with lighter fluid. Apply included water-slide decals with warm water and a soft brush. Do not use enamel thinner on bare plastic—it can craze the surface.
5. Step 5: Topcoat for durability: Spray a thin layer of matte or gloss topcoat from 30 cm away in a well-ventilated area. Two light coats protect decals and reduce fingerprints. Allow 24 hours to cure before posing. Skipping topcoat leaves decals prone to peeling during handling.

Product facts

• Premium Bandai MG 1/100 Advanced GN-X: This Premium Bandai MG 1/100 Advanced GN-X model kit is a regular Bandai release, offering builders a detailed Master Grade experience. It means you get the same high part count and articulation as a standard MG, but with a unique color scheme and parts layout that rewards careful building.