Gundam Base Limited MG Aile Strike Gundam Clear Color: Display Guide

Quick answer

To display the Gundam Base Limited MG 1/100 Aile Strike Gundam Ver.RM Clear Color at its best, build it with care for the transparent parts, pose it to highlight the inner frame, and protect it from dust and sunlight. Follow the steps below for a clean, long-lasting display.

Step-by-step display and care process

1. Prepare a clean, well-lit workspace: Clear plastic shows every speck of dust and fingerprint. Work on a clean surface with good lighting to spot small parts and avoid losing them. Wash your hands before handling the runners. A dedicated clean area reduces the risk of scratches and smudges during assembly.
2. Cut parts from the runner carefully: Use a sharp pair of side cutters and leave a small nub, then trim it flush with a hobby knife. For clear parts, avoid cutting too close to the part to prevent stress marks. Do not use sandpaper on clear plastic unless you plan to polish it back to clarity. Stress marks are more visible on clear plastic, so take your time at this stage.
3. Assemble without forcing parts: Test-fit each joint before pushing parts together. If a part resists, check the orientation or trim the peg slightly. Never use excessive force, as clear plastic can crack. Avoid solvents like plastic cement on clear parts; use a tiny amount of clear parts cement if needed. A gentle press-fit approach prevents cracks and cloudiness.
4. Apply decals selectively: The kit may include decals, but too many can clutter the clear look. Apply markings that enhance the mechanical feel, such as on the shoulders or weapons, and avoid covering large transparent areas. Use a soft cloth to press decals down without trapping air bubbles. Less is more with clear kits; decals should complement, not obscure, the inner frame.
5. Choose a dynamic pose that shows the frame: Use the included stand or a third-party action base to pose the Aile Strike in a flying or action stance. Angle the limbs so light passes through the clear armor. Avoid poses that twist joints excessively, as clear plastic can fatigue. Pose for transparency: gaps and angles let the inner detail shine.
6. Display away from direct sunlight and dust: UV light can yellow clear plastic over time, and dust dulls the shine. Place the model in a display case or shelf away from windows. If you must use a shelf, dust regularly with a soft brush or compressed air. Protect from UV and dust to keep the clear parts looking fresh.
7. Handle with care when cleaning or repositioning: When dusting or changing the pose, hold the model by the solid inner frame or base, not by the clear armor. Oils from your fingers can etch clear plastic over time. If needed, wipe with a microfiber cloth slightly dampened with water, then dry immediately. Minimize direct contact with clear parts to avoid long-term damage.

Product facts

• Gundam Base Limited MG 1/100 AILE STRIKE GUNDAM Ver.RM [CLEAR COLOR]: Gundam Base Limited MG 1/100 Aile Strike Gundam Ver.RM in clear color variant. This limited edition kit features transparent armor that highlights the inner frame, making it a display piece that rewards careful building and posing.