HG Gundam Aerial Permet Score Six: Display and Detail Guide

Quick answer

Build the HG Gundam Aerial Permet Score Six with clean nub removal, then add panel lining and detail painting before you pose it. Display it on a stand with the Permet effects parts to show off the Score Six look.

Step-by-step build and display process

1. Prep and organize parts: Open the runners and sort parts by color and body section. Keep the manual open and check off each step as you go. Common mistake: cutting parts from the runner before reading the step, which can lead to mixing up similar-looking pieces. Use small labeled bags or a parts tray for each section to avoid losing small polycaps or markings.
2. Remove nubs cleanly: Use hobby nippers to cut parts from the runner, leaving a small nub. Trim the nub flush with a sharp hobby knife, then smooth with fine sandpaper or a nail buffer. Common mistake: twisting parts off the runner, which stresses the plastic and leaves white marks. Work under good light and check the surface angle before each cut to avoid gouging the part.
3. Test-fit joints before assembly: Dry-fit the arms, legs, and torso joints before final assembly. If a joint feels too tight, gently sand the peg; if too loose, add a thin layer of clear nail polish and let it dry. Common mistake: forcing a tight joint, which can crack the socket. A snug but movable joint is the goal; if it clicks or resists, stop and adjust.
4. Panel line the armor: Use a fine-tip panel line marker or a thinned enamel wash in the recessed lines. Let it dry fully, then clean excess with a cotton swab lightly dampened with thinner. Common mistake: applying too much wash at once, which can pool and stain the plastic. Work one section at a time and check under a lamp; less is more for a clean look.
5. Add detail paint and markings: Paint small accents like vents, thrusters, and the Permet areas with a fine brush. Apply the included markings with tweezers and set them with a decal softener if you have it. Common mistake: handling decals with bare fingers, which reduces adhesion. Seal the details with a matte or gloss topcoat after the markings are fully dry to protect them.
6. Pose and display with effect parts: Attach the Permet effect parts and pose the kit on a stand. Angle the shield and beam saber for a dynamic silhouette, and keep the head slightly turned. Common mistake: posing the kit before the topcoat is fully cured, which can leave fingerprints. Display the kit at eye level or slightly above so the Permet effects catch the light.

Product facts

• Premium Bandai HG 1/144 Gundam Aerial Permet Score Six: Premium Bandai exclusive release featuring the Permet Score Six version of the Gundam Aerial. Being an exclusive means you are less likely to find this version on a standard retail shelf, so plan your build carefully and keep the parts organized.

  

• Premium Bandai HG 1/144 Gundam Aerial Permet Score Six: 1/144 scale model kit designed for assembly and display, including parts and markings. The included markings let you add the Score Six details without aftermarket decals, but they need a clean surface to sit flat.